 |
Energy Micro IEC60355 Library Example Project 1.0 (internal use only!) GCC-Version
Example project demonstrating POST and BIST library functions
|
|
Energy Micro IEC60355 Library Example Project 1.0 (internal use only!) GCC-Version
Example project demonstrating POST and BIST library functions
|
Startup code for applications based on Cortex M3 EFM32 devices. More...
#include "efm32.h"#include "config.h"#include "efm32g890f128_interrupt.h"#include "iec60335_class_b.h"
Go to the source code of this file.
Defines | |
| #define | CRC32val 0x12345678 |
Functions | |
| void | Reset (void) |
| interrupt table for GCC only | |
Variables | |
| FlashCRC_t | testsecond |
| FlashCRC_t | testfirst |
Startup code for applications based on Cortex M3 EFM32 devices.
(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com
This source code is the property of Energy Micro AS. The source and compiled code may only be used on Energy Micro "EFM32" microcontrollers.
This copyright notice may not be removed from the source code nor changed.
DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no obligation to support this Software. Energy Micro AS is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.
Energy Micro AS will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.
Definition in file startup.c.
| #define CRC32val 0x12345678 |
1.7.3