THIS IS A REQUEST FOR SUPPORT FOR THE PRODUCT CP2615-EB.
PROBLEM STATEMENT: I AM TRYING TO CONNECT THE CP2615-EB I2S INTERFACE TO TI PCM5102A I2S INTERFACE. NOTE I HAVE NOT MADE ANY CHANGES TO THE CP2615-EB BOARD.
CONFIGURATION: PC <> CP2615-EB <> TI PCM5102A <> AMPLIFIER <> SPEAKER
CONNECTIVITY: I2S INTERFACE
RESULT: THERE IS NO SIGNAL OUTPUT VIA THE I2S INTERFACE GOING TO THE TI "PCM5102A <> AMPLIFIER <> SPEAKER".
WHAT IS THE SETUP AND CONFIGURATION FOR CP2615-EB BOARD FOR CUSTOMER ADDON SUCH AS THE "PCM5102A" DAC?
I THOUGHT CP2615-EB I2S USB BRIDGE BOARD WAS FOR CUSTOMER TO EVALUATE ADDON PRODUCTS FOR CUSTOMERS THEN MOVE TO MARKET!
Recommend playing with the CP2615 EVB firstly, ensure you are able to add the power supply to the board properly, and the CP2615 can enumerate as an audio device sucessfully, also see if it works well or not while playing music, and check audio stream on the I2S interface. You can connect the board to a Windows PC or a Android Phone for the playback testing.
Then check your DAC specification to see if any hardware/software configuration is required to make it work.