I am trying to connect a PCB with a CP2102 IC to an RPi 3 running windows 10 iot core but it does not get detected. I followed the steps described in "Lab 1a: Create a basic image" (https://docs.microsoft.com/en-us/windows-hardware/manufacture/iot/create-a-basic-image) to build an image. The CP2102 driver is supposed to be included by default ( IOT_CP210x_MAKERDRIVER in TestOEMInput.xml) but it appears that this is not the case. Can you please help!
The board is built by us, we get the ICs (CP2102 not the new one CP2102N) from Mouser, and have not changed anything. We have also built the raspbian driver for cp2102x, but the RPI3 does not recognise the bridge under Linux either. Everything works fine with our PCB however, on WINDOWS 10 and UBUNTU Laptops. The descriptors as seen by the Laptops (as opposed to RPI3 which sees nothing!!!) are: