I am new to the Precision 32 Appbuilder and IDE. I am trying to initialize the SPI DMA on a SIMU3U166 device through the Appbuilder but could not find any DMA settings in in the toolbox. Any guidance is appreciated.
Thank you for your inquiry about using the Precision32 App Builder to initialize the DMA module on the SIM3U166 device. I also am unable to locate DMA settings in the App Builder, and the DMA may not be configurable via App Builder due to the module's complexity. There are, however, a number of useful resources you can use to get you started with the DMA of the SIM3U1xx devices, including example source code:
AN666: Usage Guide for SiM3U1xx, SiM3C1xx, and SiM3L1xx DMA and DTM Modules (example code for SIM3U1xx)
Additionally, the following community post contains a list of many useful application notes for general help with Precision32 and the Precision32 tools:
Thank you, and please let me know if you have any questions.