How do I order pre-programmed Silicon Labs EFM32 and 8-bit MCU products?
Silicon Labs and its distributors offer pre-programmed devices. Using this service is the easiest way to get your code onto the device. Once your binary is provided, the devices will be programmed in house and sent out. This method may be subject to minimum ordering quantities and is subject to a cost increase. Contact your distributor or your local Silicon Labs sales representative for more information.
|Arrow||Global||Programming Center||Shelby Schnurrenbergerfirstname.lastname@example.org|
|Microtek Inc.||Tokyo||2-7-5 Izumi Suginami-ku Tokyo 168-0063 Japan||Programming Center||(81) 3-5300-5594|
|Digi-Key Electronics||Thief River Falls||701 Brooks Ave S. Thief River Falls, MN 56701||Programming and Distribution Center||+1 800.344.4539||Custom.Orders@digikey.com|
Where can I find 3rd-party programmers for Silicon Labs EFM32 and 8-bit MCU products?
Many third party hardware programmers support Silicon Labs devices. These devices range in price and size and can be used for a variety of order quantities. For more information on each of the supplies, see the table with links below.
|Elnec||EFM32, EFM8, C8051 Programmers|
|GOEPEL electronic||EFM32 Boundary Scan|
|Phyton||EFM32, EFM8, C8051 Programmers, In-system Programmer|
|SEGGER||EFM32, EFR32, EFM8 Flasher ARM|
|RPM Systems Corporation||C8051, EFM8 In-system and gang programmers|
|AMFELTEC Corp.||C8051 Programmers|
|ASIX||EFM32, EMF8, C8051 Programmers|
|BPM Microsystems||EFM32, C8051 Programmers|
|Xeltek||EFM32, C8051, Si10xx Programmers|
|Data IO||EFM32, C8051, Si10xx Programmers|
|Algocraft||EFM32, EM35x, Si4010|
|SMH Technologies||EFM32, EFR32, EZR32, EFM8, C8051, Si40xx Programmers|