I'm using Simplicity Studio Version SV220.127.116.11, and I have the EFM8SB10F8G Starter Kit (SLSTK2010A)
When I use Energy Profiler to the MCU current consumption, the code on MCU does not run. When I run in either debug more or standard mode the code runs fine. I am choosing to just run the demo code as is and nothing works in the energy profiler.
When I press the reset or the push buttons the Energy profiler shows the current changing but the MCU does not appear to be running code.
Can anyone help me with this?
I am wondering if I understand your question correctly or not.
Do you mind to describe the test procedure a bit in detail?
For the demo code, has you chosen the 'run and lauuch energy profiler'?
If this doesn't start the capture, could you click the 'quick access->start energy capture'
and select the target board to see if this make any difference.
Okay, so maybe this product doesn't have that feature. When I choose the demo and the demo code there are not Mode options:
This is strange.
As far as I know EFM8SB STK should support this.
I agree that it is weird, that is why I haven't counted this as an answered question.
Any suggestions for next steps or more information needed from me?