What are the differences between the C8051F336 family's three low power modes?
|Low power mode||System clock running?||Digital peripherals running?||Flash being accessed?||Entered by:||Exited by:||Approx. current draw|
|Idle Mode||Yes||Yes||No||Setting IDLE (PCON.0) to 1, followed by a 3-cycle dummy operation (see datasheet for details)||Internal/external reset, an interrupt from any enabled digital or analog source|| Varies with VDD and clock frequency;
At VDD = 3.0V and F = 25 MHz,
draw = 4.4 mA
|Stop Mode||No||No||No||Setting STOP (PCON.1) to 1||Internal/external reset||Less than 0.1 uA|
|Suspend Mode||No||No, except for port match and timer 3, if enabled||No||Set SUSPEND (OSCICN.5)||A port match, timer 3 overflow, comparator low output, or an internal/external reset||Less than 0.1 uA|