Hello,

This Thread is very helpful however, I've been trying to work through this with several attempts, I have been able to set up the IP-Driver and NCP without any problems, 

The OTA-Server-Host seems to be working fine, it can also see my generated .OTA file "OTA Bootload Server Policy: GetNextImageCallback a=fd01::c663:4636:4ec6:ca9e m=0x1234 t=0x5678 v=0x00000001 m=0x1234 t=0x5678 v=0x00000002 s=0x00"

My OTA client (Light example) has joined the network, however on startup it displays;

After a short amount of time, I get an ASSERT reset 

Dose anyone have any Idea what I'm doing wrong?

Thanks

Bryce

On the endDevice

This is a MGM12P 1MB device

Bootloader

Internal Storage Bootloader (Multiple Images on 1MB Device)

In My .ISC file

Under the ZCL over IP tab

-General

     -Over the Air Bootloading

          -Client box checked

Under the Plugins Tab

OTA Bootload Client (Enabled)

OTA Bootload Client Policy  (Enabled)

OTA Bootload Core (Enabled)

OTA Bootload Storage CLI (Enabled)

OTA Bootload Storage Core (Enabled)

Ota Bootload Storage EEPROM (Enabled)

EEPROM (Enabled)

ZCL Core (Enabled)

the code I have been using to make the .OTA file is;

sudo ./image-builder-linux -c "apptest3777.ota" -v 0x00000020 -m 0x0000 -i 0xFFFF -t 0x0000 -s 4 -f '/home/admin1/Desktop/TATA-Sensor-ota_v22.gbl'  --security-credentials=3

I know you told me the --security-credentials=1 how ever the server sead that it != 3 so i changed it to 3 and the server liked it.

Would you mind showing if any of the settings are wrong please as its not quit working,

Sent discovery command: .well-known/core?rt=urn:zcl:c.2000.s&

get 0x00

[ASSERT:C:/SiliconLabs/SimplicityStudio/v4/developer/sdks/gecko_sdk_suite/v2.5/protocol/thread/app/thread/plugin/zcl/ota-bootload-client/ota-bootload-client.c:870]

Reset info: 0x07 (CRS)

Extended reset info: 0x0701 (AST)

Handler mode using main stack (00000000 to 20002E38), SP = 00000000

0 bytes used (0%) in main stack (out of 11832 bytes total)

No interrupts active

Reset cause: Assert 8.:0

R0 = 00000000, R1 = 00000000, R2 = 00000000, R3 = 00000000

R4 = 00000000, R5 = 00000000, R6 = 00000000, R7 = 00000000

R8 = 00000000, R9 = 00000000, R10 = 00000000, R11 = 00000000

R12 = 00000000, R13(LR) = 00000000, MSP = 00000000, PSP = 00000000

PC = 00000000, xPSR = 00000000, MSP used = 00000000, PSP used = 00000000

CSTACK bottom = 00000000, ICSR = 00000000, SHCSR = 00000000, INT_ACTIVE0 = 00000000

INT_ACTIVE1 = 00000000, CFSR = 00000000, HFSR = 00000000, DFSR = 00000000

MMAR/BFAR = 00000000, AFSR = 00000000, Ret0 = 00000000, Ret1 = 00000000

Ret2 = 00000000, Ret3 = 00000000, Ret4 = 00000000, Ret5 = 00000000

Dat0 = 00000000, Dat1 = 00000000

Init: 0x00

Thanks

Bryce

On the endDevice

This is a MGM12P 1MB device

Bootloader

Internal Storage Bootloader (Multiple Images on 1MB Device)

In My .ISC file

Under the ZCL over IP tab

-General

     -Over the Air Bootloading

          -Client box checked

Under the Plugins Tab

OTA Bootload Client (Enabled)

OTA Bootload Client Policy  (Enabled)

OTA Bootload Core (Enabled)

OTA Bootload Storage CLI (Enabled)

OTA Bootload Storage Core (Enabled)

Ota Bootload Storage EEPROM (Enabled)

EEPROM (Enabled)

ZCL Core (Enabled)

the code I have been using to make the .OTA file is;

sudo ./image-builder-linux -c "apptest3777.ota" -v 0x00000020 -m 0x0000 -i 0xFFFF -t 0x0000 -s 4 -f '/home/admin1/Desktop/TATA-Sensor-ota_v22.gbl'  --security-credentials=3

I know you told me the --security-credentials=1 how ever the server sead that it != 3 so i changed it to 3 and the server liked it.

Would you mind showing if any of the settings are wrong please as its not quit working, The EndNode pulls down the update and then Bricks its self (Like its got no FW). 

Thanks

Bryce

Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
OTA Bootload Server Policy: UpgradeEndRequest a=fde6:4cd3:a4e0:0:e610:c9ab:83d3:5354 m=0x0000 t=0xFFFF v=0x80000001 s=0x95 t=0

the EndNode then left the network and never came back on online, the cli on the endnode is also dead.

Did it resive the update and then fail to install/reboot?

Thanks

Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
Next block request
Accessing block: 0x00
OTA Bootload Server Policy: UpgradeEndRequest a=fde6:4cd3:a4e0:0:e610:c9ab:83d3:5354 m=0x0000 t=0xFFFF v=0x80000001 s=0x95 t=0

the EndNode then left the network and never came back on online, the cli on the endnode is also dead.

Did it resive the update and then fail to install/reboot

Hello BeenK,

The command I have been using is: sudo ./image-builder-linux -c "app.ota" -v 3 -m 0x1002 -i 0 -t 0x0000 -f '/home/admin1/Desktop/app.gbl'

I haven't seen anything in an716 about changing the Header Version.

If you could show me where this is set I would be very grateful.

Thanks

Bryce

Hello Kpszupin,

Thanks for your replay, Could you/anyone show me where this value is set in simplicity Studio (Thread_Stack)?

I did some digging and it looks like "EMBER_ZCL_OTA_BOOTLOAD_FILE_VERSION" & "emberFetchLowHighInt16u(finger)".
However I carn't find where i Define there in silabs IDE

Thanks

Bryce