Issue enabling DSSS in radio configuration for BRD4164A on
Proprietary Wireless Forum
I have two BRD4164A radio boards communicating wirelessly with a radio configuration based on the 915M 2GFSK 50Kbps 25K PHY. However, the board acting as the receiver will not receive any packets and trigger the RAIL_EVENT_RX_PACKET_RECEIVED event if I enable DSSS in their radio configurations. I followed this guide to modify my configuration to enable DSSS: https://www.silabs.com/community/wireless/proprietary/knowledge-base.entry.html/2020/08/26/understanding_dsssencodinganddecodingonefr32-WQxu
I attached both the original (originalRadioConfig.isc) and modified (radioConfigDSSSEnabled.isc) configuration files for comparison.
Some additional notes about the attached .isc files:
Please help me determine what the issue could be.
15 days ago
Unable to Interact with Radio Configuration tab of AppBuilder
I can't select anything in the Radio Configuration tab. Here is an image of my Radio Configuration tab, for reference.
While it looks like some fields can be interacted with, such as Protocol Name and Select a radio profile, I actually can't click on them. I can't click on anything in the tab, really. The tab is simply not responsive. Also, I know that I am not the only person with this issue. colleagues of mine have suddenly started having this issue as well.
I tried switching to a new workspace, but this did not fix the issue. The Radio Configuration tab is still not responsive.
Apr 01 2020, 12:34 PM
Unable to Interact with Radio Configuration tab of AppBuilder on
Simplicity Studio Forum
I can't seem to interact with the Radio Configuration tab of the AppBuilder in Simplicity Studio SV220.127.116.11.
I opened two example codes, Simple RAIL without HAL and Simple RAIL with HAL, to try and flash an example application to an evaluation board. However, I can't seem to interact with the Radio Configuration tab of the AppBuilder at all. Interestingly enough, I can interact with all the other tabs and global buttons of the AppBuilder without issue.
Also, I noticed that generating a configuration by clicking Generate in the AppBuilder does not result in the generation of rail_config.c/h files.
1) Using more than one example project
2) Uninstalling old versions of Simplicity Studio
3) Reinstalling Simplicity Studio SV18.104.22.168
I'm not sure what could be the issue. This was not happening the first time I opened the Simplicity Studio software. Everything actually worked just fine the first time I attempted to create a project (Simple RAIL without HAL example). All following projects have shown this issue, though.
Mar 31 2020, 2:54 PM