Are there schematics/BOM available for the HRM-GGG-PS wrist worn oximeter evaluation module? I understand that this device uses the si1143 and three green LEDs. In our designs, it would be very helpful to have schematics for this product, or, at the very least, the part numbers of the LEDs used. More definition around appropriate LEDs for oximetry applications would be very useful, ie. viewing angle, wavelength, brightness, etc.
I also want get schematic of the demo.
Is there any way to get this information? It is impacting certain design decisions we must make.
Hi Corey - Please submit a support request to our system so we can give you the schematic and BOM:
Submitting a case through this method is the only way to guarantee a response from Silabs in a timely manner.
Do you find the HRM-GGG-PS schematic？If you get the schematic，please send it to my email
liuruidiwow at 163.com（Replace at with @）
The schematic is downloaded by Simplicity Studio with the example code in the following path of your Simplicity Studio folder: