Please see the attached PDF for the answers to the following questions.

1      Are Si564 and Si569 pin-outs, PCB land patterns, and package dimensions compatible with industry standards?

2      What is the material composition of the pins?

3      What is the MSL (Moisture Sensitivity Level) of the ceramic packages?

4      What about RoHS, REACH or other materials related compliance information?

5      How much do the Si564 and Si569 oscillators weigh?

6      Are the oscillator products available in Tape & Reel?

7      What is the maximum operating junction temperature for Si564 and Si569 devices?

8      What are ΘJA and ΘJB for the Si564 and Si569 devices?

9      What are the maximum reflow temperatures and profiles recommended for “lead-free” and “leaded” solder reflow processes?

10   What is Absolute Pull Range (APR)?

11   Why is there no Min APR listed for 2.5v or 1.8v when Kv = 60 ppm/V, or 1.8V when Kv = 75 ppm/V?

12   What is the I2C address of my custom oscillator?

13    Where is the FIT information for the Si564 or the Si569?

14    What is the state of the output when it is disabled by OE?

15    What happens to the output clock when the Frequency Select (FS) pin is toggled?

16    Can these oscillators output a sine wave instead of a square wave?

Please see the attached PDF for the answers to the following questions.

1      Are Si565, Si566, Si567 pin-outs, PCB land patterns, and package dimensions compatible with industry standards?

2      What is the material composition of the pins?

3      What is the MSL (Moisture Sensitivity Level) of the ceramic packages?

4      What about RoHS, REACH or other materials related compliance information?

5      How much do the Si565, Si566, Si567 oscillators weigh?

6      Are the oscillator products available in Tape & Reel?

7      What is the maximum operating junction temperature for Si565, Si566, Si567 devices?

8      What are ΘJA and ΘJB for the Si565, Si566, and Si567 devices?

9      What are the maximum reflow temperatures and profiles recommended for “lead-free” and “leaded” solder reflow processes?

10   What is Absolute Pull Range (APR)?

11   Why is there no Min APR listed for 2.5v or 1.8v when Kv = 60 ppm/V, or 1.8V when Kv = 75 ppm/V?

12    Where is the FIT information for the Si565, Si566, or the Si567?

13    What is the state of the output when it is disabled by OE?

14     What happens to the output clock when the Frequency Select (FS) pin is toggled?

15    Can these oscillators output a sine wave instead of a square wave?

Please see the attached PDF for the answers to the following questions.

1      Are Si565, Si566, Si567 pin-outs, PCB land patterns, and package dimensions compatible with industry standards?

2      What is the material composition of the pins?

3      What is the MSL (Moisture Sensitivity Level) of the ceramic packages?

4      What about RoHS, REACH or other materials related compliance information?

5      How much do the Si565, Si566, Si567 oscillators weigh?

6      Are the oscillator products available in Tape & Reel?

7      What is the maximum operating junction temperature for Si565, Si566, Si567 devices?

8      What are ΘJA and ΘJB for the Si565, Si566, and Si567 devices?

9      What are the maximum reflow temperatures and profiles recommended for “lead-free” and “leaded” solder reflow processes?

10   What is Absolute Pull Range (APR)?

11   Why is there no Min APR listed for 2.5v or 1.8v when Kv = 60 ppm/V, or 1.8V when Kv = 75 ppm/V?

12    Where is the FIT information for the Si565, Si566, or the Si567?

13    What is the state of the output when it is disabled by OE?

14     What happens to the output clock when the Frequency Select (FS) pin is toggled?

15    Can these oscillators output a sine wave instead of a square wave?

Please see the attached PDF for the answers to the following questions.

1      Are Si565, Si566, Si567 pin-outs, PCB land patterns, and package dimensions compatible with industry standards?

2      What is the material composition of the pins?

3      What is the MSL (Moisture Sensitivity Level) of the ceramic packages?

4      What about RoHS, REACH or other materials related compliance information?

5      How much do the Si565, Si566, Si567 oscillators weigh?

6      Are the oscillator products available in Tape & Reel?

7      What is the maximum operating junction temperature for Si565, Si566, Si567 devices?

8      What are ΘJA and ΘJB for the Si565, Si566, and Si567 devices?

9      What are the maximum reflow temperatures and profiles recommended for “lead-free” and “leaded” solder reflow processes?

10   What is Absolute Pull Range (APR)?

11   Why is there no Min APR listed for 2.5v or 1.8v when Kv = 60 ppm/V, or 1.8V when Kv = 75 ppm/V?

12    Where is the FIT information for the Si565, Si566, or the Si567?

13    What is the state of the output when it is disabled by OE?

14     What happens to the output clock when the Frequency Select (FS) pin is toggled?

15    Can these oscillators output a sine wave instead of a square wave?