I'm working on BGM210PB module and I'm having some issues with initialization.
It falls at II_radioInit() and don't exits anymore.
- custom PCB with BGM210PB module
- no external LF XTAL
- example project "soc_empty" for BGM210PB32JIA
- DEBUG disabled
- no drivers init (gpio, uart)
- init clocks (default from soc_empty)
- Simplicity 5 with lastest SDK version
Hi, discussion about the same topic can be found here: https://www.silabs.com/community/wireless/bluetooth/forum.topic.15.15.html/ble_stack_init_stuck-bgm210p32-0W73
It seems that you already found the thread but just to note also other people reading this. BR, Juha