Could you give me advice? I need to connect two Bluetooth microchip with RHD2000 SPI interface cable and open source hardware box.
The scheme is:
RHD2000 SPI interface cable - BLUEGIGA BLE112 - BLUEGIGA BLE112 - open source hardware box.
What programming should I use and which pins should be soldered.
Well you don't really describe what is the RHD2000 or the open source hardware box, it's hard to give any advice without any specific information on what you want to do.
Thank you for your reply. I am creating commutator and I need wireless communication between SPI cable and open source hardware box. I am sending description of SPI cabel this cabel is also attached to Open source hardware box. Could you please have a look, I am not familiar with creation bluetooth communication and I am trying. Thank you
You basically need an SPI to Bluetooth bridge is that it? Well, you'll have to learn about Bluetooth because what you are asking is essentially to design the entire solution for you and that's not something we are going to do.
I am sorry. I have read literature, but could not find coding information. Could you please send useful links for BLE112. Thank you
All the relevant material is in BLE112 product page: https://www.silabs.com/products/wireless/bluetooth/bluetooth-low-energy-modules/ble112-bluetooth-smart-module