I noticed a strange behavior of the Lab_4 project from the Getting Started with SSv5 series on BGM220 Explorer Kit (BRD4314A). After establishing a connection with BT server, any button press causes disconnection, no matter if notifications are enabled or not. After disconnection the device does not re-start advertisements. The same code works just fine on Thunderboard Sense 2 and Thunderboard BG22 boards, but not on BGM220 Explorer Kit. The only way I made it working is adding a 1ms delay within the Simple Button event handler right after sending the signal to BT stack (line 46 in the attached project file app.c). If you uncomment this line, everything starts working fine. I use SSv5 SDK 3.1.0 on Windows 10. What is the reason and how to fix it without any fake delays?
I have similar troblem on BGM220 Explorer Kit.
When I upload my created files with example projects, they dont work.
But demo's(upload directly at EXAMPLE PROJECTS & DEMOS window) looking find.
Do you have same issue like me?
No, my problem is different. Uploaded codes work, but something is not as expected, see above.