Hello, i have the next problem. I connect, get a respond and event. all seems to work good and then suddenly (sometimes) the connection is broken with error
0x023E. See below.
Has anyone any idea what can be the cause.
2014.07.14 10:41:17.0498 ble_cmd_gap_connect_direct address: 0c 00 00 32 8d 06 addr_type: 0 conn_interval_min: 3c conn_interval_max: 4c timeout: 64 latency: 0
2014.07.14 10:41:17.0498 TX: 000f06030c0000328d06003c004c0064000000
2014.07.14 10:41:17.0498 ble_rsp_gap_connect_direct result: 0 ['No Error'] connection_handle: 1
2014.07.14 10:41:17.0498 RX: 00030603000001
2014.07.14 10:41:17.0841 ble_evt_connection_status connection: 1 flags: 5 address:0c0000328d06 address_type: 0 conn_interval: 40 timeout: 64 latency: 0 bonding:ff
2014.07.14 10:41:17.0841 RX: 8010030001050c0000328d0600400064000000ff
2014.07.14 10:41:18.0295 ble_evt_connection_disconnected connection: 1 reason:23e ['LL initiated a connection but the connection has failed to be established. Controller did not receive any packets from remote end.']
2014.07.14 10:41:18.0295 RX: 80030304013e02
I have had the same problem numerous times. According to me its a battery problem. I get this error when the battery is running low.
Try replacing it.
Hope it works out.
I am getting this intermittently when using the blue dev kit that is powered with a USB cable from my laptop.
What else can cause this issue?
I am having this problem a lot when using Bluegiga USB dongles (BLED112). It is happening intermittently, sometimes it connects, sometimes it gives the error. I have it happening on two BLED112 dongles now.