I am new to the Silabs boards. When I run the range test example code and open the terminal Serial 1 tab for my devices, I can only see a couple hundred lines of the UART log. Is there anyway to prevent extend the number of lines or anyway to generate a csv file?
Which part you are using?
What tools and where you are using and see only hundred line of log? do you have a screenshot to make the issue more clear?
Here is the log I am talking about, The only packets I can see data for in the log are 659-772 as all the packets before 659 were cut off.
EFR32FG 2400/434 MHz Wireless Starter Kit
Thank you for the helpful screenshot you provided showing that you are using the Simplicity Studio Network analyzer console output. I have a couple of suggestions:
1) You may be able to log the console output to a .csv file by clicking the terminal icon near the bottom left of the console window, clicking [Append to text file...], then selecting/creating a file to write to:
2) You may be able to get more lines of console output by changing the console preferences. To do this, click [Window]>[Preferences], then click [Run/Debug]>[Console] and uncheck the [Limit console output] checkbox:
I hope this helps! Let me know if you have any questions.