I have a Host processor and on top of the Z-Wave controller, a module shield inserted.
Z-wave controller perfectly initializes network with 7.11 and after I do RF OTA of ZW_SerialAPI_Controller_7.15.1_178_ZGM130S_REGION_US.gbl.
So, RF OTA has successfully done but after Reboot the (Host) system, zip gateway, and network initialize with 7.11 version only. Not upgrade 7.15 version.
Kindly tell me what is the reason behind this? also, tell me up-gradation directly possible from 7.11 to 7.15 or we need to upgrade step by step like 7.11..12...13 so on.
if step by step possible then please provide me sample .gbl files with all OTA versions from 7.11 to 7.15. So I will demonstrate on your given files.
also, I was trying RF OTA using PC Controller then give it Error - "firmware update locally not supported". Please find attached a screenshot.
Thank you. Regards,
Pratik J Panchal
The Z-Wave controller firmware can be upgraded from version 7.11 to 7.15 directly, but you need to use OTW (Over The Wire / Serial port) firmware update instead of OTA (Over The Air/RF) to load a newer version of SerialAPI Controller binary in .gbl format.
Depending on what device (ZGM130S module or EFR32ZG14 SoC) used on your Z-Wave controller, choose the proper SerialAPI controller image in Z-Wave SDK.
Thanks for the response.
Using our Gateway Host.
CASE 1 :
if we perform controller OTA of 7.12.1 using ZW_SerialAPI_Controller_7.12.1_31_ZGM130S_REGION_US.gbl file.
zipgateway build version 7.11 then OTA(Over the Air) performed well and z-wave module version updated from 7.11 to 7.12.
CASE 2 :
if we perform controller OTA of 7.15.1 using ZW_SerialAPI_Controller_7.15.1_178_ZGM130S_REGION_US.gbl file.
zipgateway build version 7.15 then OTA(Over the Air) performed well and z-wave module version not updated from 7.12/7.11 to 7.15.
So, I do not understand why OTA does not perform for 7.15?
I use firmware update part from the demo app code of zware-700/zware-700/zware-700/src/zwave/hcapi/demos/add_node/add_node.c.
and I did modifications for controller OTA. there is only one modification required and it is the target.
Here I attach one code snippet kindly gone through it.
Thanks & Regards,