I want to use Zigbee HA for one of the project and for testing I have used 3 wireless starter kit board along with the Mighty radio module (BRD4151A). I have installed EmberZNet SDK 6.7 and Gecko SDK 2.7.
I have configured first board as coordinator, second as router and the third board as End device. Coordinator is able to form the network and other two devices are joining to the network. I want to bind the buttons on the End-device to the coordinator/router and set the binding table. With the CLI command, I am able to set the binding table and send the binding request to the particular device with destination Node ID and EUI64 Identifier. I want implement button binding as a part of application on button press(When I press particular button it has to send binding request to dedicated coordinator/router device and binding table has to be set), So that End-device has to send control command to the coordinator/router depending on the Binding table index.
Can any one please suggest me on how i can implement button binding as a part of application?
Rashmi H R