Tags
- Wireless
- RF Hardware
- EFR32MG1P232F256GM48
- EFR32MG21 Series 2 SoCs
- Proprietary
- Development Environments
- ETRX357
- Zigbee SDK
- ZigBee and Thread
- Connect SDK
- Software Development Kits
- Blue Gecko Bluetooth Low Energy SoCs
- 32-bit MCUs
- Bluetooth Low Energy
- Gecko SDK
- Zigbee and Thread Kits
- EFR32MG1P132F256GM48
- Telegesis Legacy Modules
- RF Synthesizers
- Flex Gecko
- Knowledge Base Articles
- Simplicity Studio
- Telegesis ETRX Driver
- EFR32MG21 Series 2 Modules
- EFR32MG22 Series 2 SoCs
- Software
- Mighty Gecko SoCs
- MGM111A256
Top Authors
Archives
- 2016 March
- 2016 May
- 2016 June
- 2016 July
- 2016 September
- 2016 November
- 2016 December
- 2017 January
- 2017 February
- 2017 March
- 2017 April
- 2017 May
- 2017 June
- 2017 July
- 2017 August
- 2017 September
- 2017 October
- 2017 November
- 2017 December
- 2018 January
- 2018 February
- 2018 March
- 2018 April
- 2018 May
- 2018 June
- 2018 July
- 2018 August
- 2018 September
- 2018 October
- 2018 November
- 2018 December
- 2019 January
- 2019 February
- 2019 March
- 2019 May
- 2019 August
- 2020 February
- 2020 March
- 2020 April
- 2020 May
- 2020 June
- 2020 July
- 2020 August
- 2020 October
- 2020 November
- 2020 December
- 2021 January
- 2021 February
EFR32 Series 1 VDD rail relations
Question
What relations should be kept between the different VDD rails of EFR32 Series 1 for proper operation?
Answer
The following power supply restrictions need to be followed on the EFR32 Series 1 devices:
• VREGVDD must be the highest voltage in the system for EFR32.
• VREGVDD = AVDD
• DVDD <= AVDD
• IOVDD <= AVDD
• RFVDD <= AVDD
• PAVDD <= AVDD
• DVDD > DECOUPLE
These relations above are strongly recommended to be followed for proper operation of EFR32 wireless gecko, and mainly due to the internal ESD diode structures and operation conditions.