If your existing Host-NCP solution is lacking Green Power proxy support and you want to add it to the design these steps will walk you through the process of adding it.
First, go to the ZCL Clusters tab and find the Multiple endpoint configuration section at the top. Click the New button to add an endpoint to your device, this will create a second endpoint on the device with identifier 2. Now we need to convert this to a green power endpoint.
In the Configuration column, click the Primary name, which will bring up a button with 3 dots
Click the box to bring up the Endpoint type window
Select the option Create new endpoint type and name your new endpoint Green Power. Click OK.
Keeping the endpoint selected, go to the pull-down menu for ZCL Device Type and change the device to GP Proxy Basic (under GP devices). When this is selected, this will make the endpoint change to number 242. This should also enable Cluster 0x0021, the Green Power cluster, on the device.
Now go to the Plugins tab and on the search bar, enter Green – this will find 4 plugins in the Green Power section:
Check the box next to the Green Power Client and Green Power Common plugins, this will enable them. There isn't any need to change any of the default settings within the plugins, so you can leave those alone.
At this point you should be able to generate and build your host application with no issue and Green Power will be supported. However support for green power needs to be enabled within the NCP.
As you are configuring your NCP application, go to the plugins tab and enable the Green Power Stack Library plugin. Make sure the Green Power Stack Stub Library is disabled:
Since this is just a proxy, you can leave the settings as defaulted, proxy table size of 5 and sink table size of 0. However you will need to consider your potential network when configuring your table sizes. A larger proxy table might be needed for supporting all devices on the network.
This is all you need for NCP support. You can generate and build your NCP and combined with your new host code, green power proxy support should be ready to go.