Common Specs
- High-speed operation
- DC to 10 Mbps
- No start-up initialization required
- Wide operating supply voltage
- 3.15 – 5.5 V
- Up to 1kVrms isolation
- High electromagnetic immunity
- Low power consumption (typical)
- 2.3 mA per channel at 10 Mbps
- Tri-state outputs with ENABLE
- Schmitt trigger inputs
- Default high or low output
- Precise timing (typical)
- 40 ns propagation delay
- 20 ns pulse width distortion
- 100 ns minimum pulse width
- Transient immunity 50 kV/μs
- AEC-Q100 qualification
- –40 to 125 °C temperature range
- RoHS compliant QSOP16 packages
Find the Right Si80xx Device
Select Columns
| Part Number | Max Propagation Delay | Isolation Rating (kVrms) | Enable Control | Default Output State | Package Type | Output Supply (V) | Input Supply (V) | Temperature Range (°C) | Forward Channels |
|---|---|---|---|---|---|---|---|---|---|
| 65 | 1 | Low | QSOP16 | 3.15 5.5 | 3.15 5.5 | -40 125 | 3 | ||
| 65 | 1 | Low | QSOP16 | 3.15 5.5 | 3.15 5.5 | -40 125 | 3 | ||
| 65 | 1 | Low | QSOP16 | 3.15 5.5 | 3.15 5.5 | -40 125 | 4 | ||
| 65 | 1 | Low | QSOP16 | 3.15 5.5 | 3.15 5.5 | -40 125 | 4 | ||
| 65 | 1 | Low | QSOP16 | 3.15 5.5 | 3.15 5.5 | -40 125 | 5 | ||
| 65 | 1 | Low | QSOP16 | 3.15 5.5 | 3.15 5.5 | -40 125 | 5 | ||
| 65 | 1 | Low | QSOP16 | 3.15 5.5 | 3.15 5.5 | -40 125 | 6 |
Sort A -> Z
Sort Z -> A
Filter by values...
Isolated USB Evaluation Kit
The Isolated USB Evaluation Kit is a demonstration and evaluation platform for creating Isolated USB solutions. It can be used in conjunction with EFM32 and EFM8 MCU Stater Kits (STKs). It simplifies the process of creating an isolated USB solution by offering an already built and functioning platform. The board schematics are available and there are examples that can be run on the MCU STKs to communicate via isolated USB. The board contains two isolators, a USB to UART bridge device, a 20-pin breakout header for easy connection, many headers for debugging and evaluation, and a micro USB port.
Isolated USB Evaluation Kit
The Isolated USB Evaluation Kit is a demonstration and evaluation platform for creating Isolated USB solutions. It can be used in conjunction with EFM32 and EFM8 MCU Stater Kits (STKs). It simplifies the process of creating an isolated USB solution by offering an already built and functioning platform. The board schematics are available and there are examples that can be run on the MCU STKs to communicate via isolated USB. The board contains two isolators, a USB to UART bridge device, a 20-pin breakout header for easy connection, many headers for debugging and evaluation, and a micro USB port.