We have been using your CP2102 USB to serial converter in our hardware for years. We have recently run into a problem running our hardware with windows 7. THe data being sent from the USB side to the serial side is corrupted when using a windows 7 machine with the SILabs windows 7 drivers. However that same hardware and cabling works fine when using an XP machine and the older drivers. Has anyone seen this problem before? We have a program that spits our a stream of data and waits for a response. When we run this program straight from a computer serial port, it works fine. When we run the program through the CP2102 using an XP machine it works fine. However when we run that program on a windows 7 machine the data is slightly corrupted.
Thanks for the advice on this.