Using Z/IP Gateway without br-lan
Try this article out and let me know if it helps.Show more
Apr 30 2020, 6:31 PM
Local only Z/IP client, remove the ethernet port from br-lan on Z-Wave Technology Knowledge Base
In some cases, a solution may be running a zip client locally. In these cases, perhaps you wish to prevent zip traffic from leaving the gateway.
The quickest solution to keeping zip traffic on the gateway, is to take the default lan configuration, and simply delete the ethernet port from the br-lan, leaving all other configuration constant.
Because the zipgateway controls ipv6 address assignment, a local zip client should now be able to use ipv6 addresses to control end nodes.
But what if you need IPv4 control? You will need to run a dhcp4 server on your gateway. In this example, I am using isc-dhcp-server
At this point, you should reboot and confirm everything is working. You should now be able to control zip nodes with ipv4 addresses.
Apr 30 2020, 5:29 PM