I am using the Blue Gecko Module Wireless Starter Kit to program the BGM113-A.
The problem is that I can't debug any projects. Is there something wrong with the bootloader or debug settings?
Are you seeing errors when you try to launch a debug session for the projects? Have you programmed a Gecko Bootloader on the board ( please see this Knowledge Base Article about the need for a Gecko Bootloader for Bluetooth projects: https://www.silabs.com/community/wireless/bluetooth/knowledge-base.entry.html/2018/01/26/why_doesn_t_my_sampl-sHDy ).
Thank you for the quick response. I have now managed to program and debug the project. It was due to the missing Bootloader.
Here is how I flashed the Bootloader on the board:
All the steps are also described in chapter 4 (Getting Started with the Gecko Bootloader) of the "UG266: Silicon Labs Gecko Bootloader User's Guide", which you can find here: