Question

What is the strength of the internal pull up on the BGM113 RESETn pin?

Answer

The internal pull-up on the BGM113 reset line (RESETn) is the same as those present on other GPIO pins, and is specified in the BGM113 Data Sheet by the "I/O pin pull-up resistor" (RPU) parameter in Table 4.20 "GPIO" (of section 4.1.11 GPIO).  RPU is specified as 30/43/65 kOhm (min/typ/max) in the revision 1.00 data sheet.

  • Knowledge Base Articles
  • Bluetooth Low Energy
  • Bluetooth Classic