How to configure 10 bit long sync word?
Which bits sent exactly?
For example :
Set SYNC_BITS.BITS[31:24] property (0x1101) to 0xB2
and SYNC_BITS.BITS[23:16] property (0x1102) to 0xD5.
Set SYNC_CONFIG2.LENGTH_SUB property (0x1105) to 0x03, it means the Sync word is 6 bits less.
In this case the radio sends the following over air pattern:
First the radio sends the 0xB2 in least significant bit order:
bit 24, bit 25, bit 26, .. ,bit 30, bit 31
Then the 0xD5 in least significant bit order, but without last the 6 bits:
bit 16, bit 17.
So the not sent bit are: bit 18, bit 19, .. , bit 22, bit 23.
These are marked with red below:
The over air pattern can be reviewed also in WDS