I just purchased the new module WGM160P. I am facing issues with the HTTP commands. I am trying to use the hge and hpo command with https link but device failes to connect to. Below is a log from the device:
[2019-12-10 | 09:34:48: Opening: dev.things.al]
Request GET /
Connecting (https): dev.things.al:443
TLS handshake failed:: state:2, code:-0x6580, verify:0x0
TLS failed, err:7602
[2019-12-10 | 09:34:53: Open failed]
There is no explanation on the website about the code:-0x6580 and the err:7602.
Any help would be appreciated.
I can see this as well. Will investigate more then pass to the RnD team to look as well. How is that blocking for you? Do you need to connect to this host for something specific related to your project?
I opened a case to this post https://www.silabs.com/community/wireless/wi-fi/forum.topic.html/problem_with_httppostcommand-zpIW and I am not trying to use dev.things.al as a bridge to connect to the fiscalization server. But it seems that WGM 160p is unable to connect to the server.
Did you have time to have a look at it?