We're currently evaluating the WGM160P.
In the documentation for the device it seems that there is a USB port available.
Can the WGM160P be issued commands and be controlled over the USB port?
If not, is there any timeline for this support?
Please find this previous thread on WGM160P USB interface : https://www.silabs.com/community/wireless/wi-fi/forum.topic.html/wgm160p_usb_programming-R0DM
Yes, it is possible to issue commands and control to WGM160P using the USB port.
Nevertheless, we don't have an example for this with WGM160P.
But the WGM160P uses the GG11 MCU and so you should be able to use GG11 USB interface examples to get this on WGM160P.