WGM110: Setting the WSTK in Debug Out Mode without Simplicity Studio
10/281/2016 | 10:19 AM
Typically if you want to use a WSTK to program an external device you can change the Debug Mode using Simplicity Studio. However if you're only working with WGM110 and no other Silicon Labs product which requires Simplicity Studio installation you can change the Debug Mode with (and old version) of Simplicity Commander within the WGM110 SDK.
The commander executable is located in C:\SiliconLabs\WizardGeckoSDK\WGM110-1.0.1\bin\commander and you can change the Debug Mode by selecting "Kit" on the left-hand side.
Knowledge Base Articles
And this thread should help with getting the connections up and running.