Common Specs
- UVLO safety feature
- UVLO status feedback to controller
- Both drivers shutdown feature on UVLO fault
- 1 ms safe start-up delay: Allows safe system start-up
- EN (active high) instead of DIS for added safety
- EN pin ESD circuit does not power up chip
- EN pin ESD circuit does not power up chip
- 2.5 V VDDI capability
- High CMTI: 100 kV/µs
- Safety certified: UL, IEC/VDE, CSA, CQC
Find the Right Si8239x Device
Select Columns
Part Number | Isolation Rating (kVrms) | Peak Output Current (A) | UVLO Voltage (V) | Input Type | Output Configuration | Package Type | Overlap Protection and Dead Time Control | AEC-Q100 | Temperature Range (°C) | Driver Supply (V) | Input Supply (V) | Max Propagation Delay (ns) | 10 kV Surge |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5 | 4 | 6 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 8 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 12 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 6 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 8 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 12 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 12 | VIA, VIB | High Side / Low Side | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 6 | PWM | High Side / Low Side | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 8 | PWM | High Side / Low Side | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 12 | PWM | High Side / Low Side | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 6 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 8 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 12 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 6 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 8 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 12 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 6 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 8 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 12 | VIA, VIB | Dual Driver | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 6 | PWM | High Side / Low Side | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 8 | PWM | High Side / Low Side | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 | ||||
5 | 4 | 12 | PWM | High Side / Low Side | WB SOIC16 | -40 125 | 6.5 24 | 2.5 5.5 | 60 |
Sort A -> Z
Sort Z -> A
Filter by values...
Si8239x Isolated Gate Driver Evaluation Kit
The Si8239x evaluation board allows designers to evaluate Silicon Labs Si8239x family of ISOdrivers. Screw terminals are provided to allow for quick evaluation of the devices’ key parameters. Test points are also included on each of the device pins to accommodate direct connection to the designer’s end system. In addition, jumpers are included to allow for manual setting of the devices input as well as the boot strap circuitry on the output if desired. The boards come populated with the Si82394 version of the family. However, jumpers provided should let the user replace the Si82394 with one of the dual input versions of the device.

Si8239x Isolated Gate Driver Evaluation Kit
The Si8239x evaluation board allows designers to evaluate Silicon Labs Si8239x family of ISOdrivers. Screw terminals are provided to allow for quick evaluation of the devices’ key parameters. Test points are also included on each of the device pins to accommodate direct connection to the designer’s end system. In addition, jumpers are included to allow for manual setting of the devices input as well as the boot strap circuitry on the output if desired. The boards come populated with the Si82394 version of the family. However, jumpers provided should let the user replace the Si82394 with one of the dual input versions of the device.