RS9113 Wi-Fi NCP Modules

The RS9113 FIPS 140-2 Level 1 certified Wi-Fi modules is based on Silicon Labs' RS9113 ultra-low-power Convergence SoC. These modules offer dual-band 1x1 802.11n. They are high performance, long-range and ultra-low-power modules and include a multi-threaded MAC processor called ThreadArch®, digital and analog peripheral interfaces, baseband digital signal processor, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI flash.

The module's embedded firmware includes the WLAN protocol stack along with WPA/WPA2-PSK and WPA/WPA2-Enterprise (EAP-TLS, EAP-TTLS, EAP-PEAP)and a feature-rich TCP/IP stack thus providing a fully-integrated solution for secure embedded low-end wireless applications. These modules can be connected to 8/16/32-bit host processors through SPI, UART, USB and USB-CDC interfaces.

The modules are available in a small footprint form factor with low BoM requirements.

802.11 b/g/n Wi-Fi
Single and Dual Band

RS9113 Module Common Specs

WLAN

  • Compliant to single-spatial steam IEEE 802.11 a/b/g/n with dual band (2.4 and 5 GHz) support
  • Support for 20 MHz channel bandwidth
  • Transmit power up to +18 dBm with integrated PA
  • Receive sensitivity of -97 dBm.

Software/Firmware

  • WLAN stack embedded in the device
  • Supports WPA/WPA2-PSK, WPA/WPA2-Enterprise (EAP-TLS, EAP-TTLS, EAP-PEAP)
  • TCP/IP stack embedded in the device – includes:
    • IPv4 and IPv6
    • DHCP Server/Client
    • HTTP Server/Client
    • Static and Dynamic Webpages with JSON Objects (for HTML Server)
    • ICMP
    • Websockets
    • DNS Client
    • IGMP
    • SNMP

FIPS

  • *FIPS 140-2 Level 1 Certification for modules with and without antenna
  • FIPS Approved and non-FIPS Approved modes of operation
  • FIPS Approved Algorithms
    • AES 128-bit in CBC mode Encrypt/Decrypt key wrapping
    • AES 256-bit in CBC mode Encrypt/Decrypt key wrapping
    • AES CCM
    • AES-128 CMAC
    • SHA-1, SHA-256
    • HMAC-SHA1, HMAC-SHA256
    • RSA PKCS#5 v1.5 with 2048-bit key and SHA-256 for Digital Signature Generation/Verification
    • SP800-90 DRBG HASH_DRBG
    • SP800-108 KDF
    • CVL: SP800-135 TLS v1.0 KDF
  • Non-approved Algorithms allowed in FIPS mode
    • Hardware non-deterministic random number generator
    • Diffie Hellman
    • RSA
  • Non-approved Algorithms for non-FIPS mode
    • RC4
    • DES
    • MD4
    • MD5
  • Support for Power-up tests like Cryptographic Algorithm tests, Firmware/Bootloader integrity tests, Critical functions tests
  • Support for Conditional tests like Firmware load test, Manual key entry test and Continuous random number generator test

General

  • FCC, IC, ETSI/CE Certified
  • SPI, UART, USB, USB-CDC host interfaces
  • Wireless firmware upgrade
  • Options for Single supply of 3.0 to 3.6 V operation or multiple supplies for power saving
  • Operating temperature range:
    -40 ºC to +85 ºC
Find the Right RS9113 Wi-Fi NCP Module Select Columns
Select Columns
Part Number Wi-Fi Bluetooth 5 Frequency Band Dimensions Package Type Antenna Option
Dual Band (2.4/5) 14 x 15 x 2.1 LGA101
Dual Band (2.4/5) 14 x 15 x 2.1 LGA101
Dual Band (2.4/5) 16 x 27 x 3.1 LGA79 Integrated Antenna
Single Band (2.4) 16 x 27 x 3.1 LGA79 Integrated Antenna
Single Band (2.4) 14 x 15 x 2.1 LGA101
Single Band (2.4) 16 X 27 X 3.1 LGA101 Integrated Antenna
Dual Band (2.4/5) 14 x 15 x 2.1 LGA101
Dual Band (2.4/5) 16 x 27 x 3.1 LGA79 Integrated Antenna
Single Band (2.4) 14 X 15 X 2.1 LGA101
Single Band (2.4) 16 x 27 x 3.1 LGA79 Integrated Antenna

Sort A -> Z
Sort Z -> A

Filter by values...

Contact Sales
Close
Loading Results